Saturday 27 February 2016

My first paper building


As I've said before I am useless at painting models. The first buildings I purchased were for 28mm scale miniatures and I bought them before I had any models.

Once I purchased some models they seem on the little side. Usuable but small. These cost me about £25 each so I decided that purchasing building models for 28mm gaming wasn't the way to go.

So after looking through a few blogs I stumbled across some blogs about paper buildings. They looked great. Wasn't that keen on the paper trees and few other props but on the whole the buildings looked awesome. Also reading the blogs mounting on foam core was better than using card.

So I searched the internet to find some plans and I found some great free buildings and then I stumbled across Carl Stoezel's buildings and the free sample building he gives away. The abandoned warehouse. The other free buildings I found didn't have internal decorations such as printed walls and floors but the warehouse from Carl did. It also came with very clear instructions  on how to build it.

The first Building I made was the free sample, the abandoned warehouse from Stoezel. I hadn't made any models for over 20 years and it looked fairly easy to construct until glueing together. I learn't a few lessons the hard way.
After building this I decided to purchase and use Stoezel's buildings. I have since purchased the M.U.C.K. collection of buidlings and built some so I can play the game.

From the pictures it looks great but as you look closer you can see the msitakes that I made and the cover up attempts. It doesn't affect game play. I have added walk ways to two sides of the building and plan to make a carpark to cover the other two sides. The sidewalks came from the M.U.C.K. pack.


A few pointers colour in all blue rabbit lines even if they are to be glued into a rabbit as they can still show and practice pratice pratice with a glue gun before using as less is so much more and I discovered that with all my glueing I over applied in every case even when I thought I was being sparse. The exception to this would be I definitely needed to use more spray adhesive as I had to go back and stick the corners back down on most pieces with crazy glue. Also when printing tick the box saying print actual size as my printer always starts with scale down oversized images. This makes the buildings slightly smaller. Doesn't affect gameplay and you may prfer the scaling down version size. But just a warning. Also set the printer setting brighter as the images are quite dark to start with.

My first building is not great but is definitely usable and the mistakes are barely noticeable on a gaming table, the pics speak for themselves I think.






The last pic has got a well known model Ray fighting 2 zombies to show the scale of the building.

4 comments:

  1. Hey they're not as easy to build as they first seem. You did well there.

    ReplyDelete
    Replies
    1. Thanks Irqan and yes they are not as easy as you think

      Delete
  2. Great job dude! I built this building as my first foray into card modelling. It's definitely not as easy as some people make it look.

    Welcome to the world of zombie game blogging too!

    ReplyDelete
    Replies
    1. Thanks Bob. I saw yours yesterday on your blog. Your table you've been building looks good

      Delete